No, the dry ice jet is non-conductive as long as the compressed air used is dry.
TOP OF THE PAGE
Contact: RSG Technologies, Inc.
info@ saudidryice.com
Tel : 00966 38509441 , 00966 38509443
Fax : 00966 38509446
TOP OF THE PAGE
Yes. Systems customized to specific tasks are a definite possibility.
Please Contact RSG Technologies, Inc..
TOP OF THE PAGE
IceTech dry ice blasting machines are engineered from high-quality components that require a minimum of
maintenance. The machines were designed to enable service and maintenance work to be performed by end-users
without the need for specialists. All service and maintenance routines are illustrated in video clips
on a CD-ROM that accompanies the machine. The estimated maintenance requirement for IceBlast machines
under normal industrial conditions is 1 hour per 100 hours' operation.
TOP OF THE PAGE
KG30S Dimensions:
Length: 22.8 inches
Width: 21.2 inches
Height: 31.4 inches
KG50S Dimensions:
Length: 27.5 inches
Width: 21.6 inches
Height: 35.4 inches
TOP OF THE PAGE
In a one-hose system, dry ice is mixed with compressed air in the machine itself. This allows the dry ice pellets
to attain a higher velocity (kinetic energy) and thus provides greater cleaning effectiveness. In a two-hose system,
dry ice pellets are sucked into the blasting gun through a venturi system. As the pellets are first mixed with
compressed-air in the blasting gun, their velocity is lower than in a one-hose system, and their cleaning effectiveness
is thus lower.
TOP OF THE PAGE
Dry ice pellets are supplied in insulated containers that typically hold 880 lbs. These containers can be
moved to various application sites on fork-lift trucks or pallet lifters. Dry ice pellets can be kept in
these containers for about 4–8 days depending on ambient temperature and container quality. Due to sublimation,
a loss of about 4% of container content should be expected every 24 hours.
TOP OF THE PAGE